Base Metals

• Flowsheet alternatives for high acid consuming copper ores
  
  by K Baxter¹, A Nisbett², M Urbani³, K Marte^{4
  1}Bateman Engineering Pty Ltd, Perth Australia
  ² Cognis Corporation, Tucson, USA
  ³ Cognis Australia Pty Ltd, Perth Australia
  ⁴ Bateman Engineering Canada Corporation, Vancouver Canada
  ALTA 2008 Nickel-Cobalt, Copper & Uranium Conference, 16 - 20 June, 2008, Perth, Australia.

• The use of autoclaves in uranium leach flowsheets
  
  by RJ Verster*, and HJH Pieterse**
  *Technical Manager – Uranium. Bateman Minerals & Metals, a Division of Bateman Projects Limited.
  **Autoclave consultant and principal member of Pieterse Consulting
  ALTA 2008 Nickel-Cobalt, Copper & Uranium Conference, 16 - 20 June, 2008, Perth, Australia.

• Design considerations for the cobalt recovery circuit of the KOL (KOV) copper/cobalt refinery, DRC
  
  by KG Fisher* and LG Treadgold**
  * Bateman Minerals & Metals
  ** Consulting Metallurgist
  ALTA 2008 Nickel-Cobalt, Copper & Uranium Conference, 16 - 20 June, 2008, Perth, Australia.

• Treatment of copper sulphide deposits – evaluation of a Galvanox™ versus Cepon circuit configuration
  
  by K.J. Miller, L.A. Sylwestrzak and K.G Baxter, Bateman Engineering Pty Ltd, Perth, Australia
  ALTA 2008 Nickel-Cobalt, Copper & Uranium Conference, 16 - 20 June, 2008, Perth, Australia.

• Economic Considerations for Primary Copper Sulphide Leaching
  
  Presentation by  Ken Baxter, Copper 2007, Toronto, Canada, August 2007

• GALVANOX^TM TREATMENT OF COPPER CONCENTRATES
  
  By David G Dixon¹ Ken G Baxter² and Linus A Sylwestrzak²*
  ¹ University of British Columbia, Vancouver, Canada
  ² Bateman Engineering Pty Ltd, Perth, Australia

• Developments in Cobalt and Nickel Electrowinning Technology
  By A G Pavlides, Bateman Engineering.

• Recovery of base metals using MetRIX™

  by Bert Van Hege, Deon van Tonder and Richard Bell, Bateman Minerals and Metals, and Jacolien Wyethe and Marthie Kotze, Mintek. ALTA 2006, Australia
  

• The use of selective ion exchange for the recovery of base metals from effluent streams

  by J. Wyethe and M. Kotze, Mintek, and B. Van Hege and R. Bell, Bateman Minerals and Metals; South African Institute of Mining and Metallurgy Third Southern African Conference on Base Metals. Copyright held by SAIMM
  

• Design and Operating Experience from the Mt. Gordon Copper Operations of Western Metals
  
  by K.G. Baxter, et al; BATEMAN and Western Metals Ltd;
  AL T A Copper; (September 2001) and SAIMM (2001).
  Copyright held by SAIMM

• The Kasese Cobalt Project
  
  by K.G. Fisher and A.G. Pavlides, BATEMAN, SAIMM Conference, Extraction Metallurgy Africa '98, August 1998. Copyright held by the SAIMM

• The Application of Ausmelt Technology to Base Metal Smelting, Now and In the Future
  
  by P.N. Vernon and S.F. Burks, BATEMAN, SAIMM Colloquium: Trends in Base Metals Smelting and Refining, 1997. Copyright held by SAIMM

• Developments in Liquid Liquid Contacting Unit Designs
  
  by S.F. Burks, BATEMAN, SAIMM SX/EW
  Design School, October 1999.
  Copyright held by SAIMM

• A Case Study of three different Solvent Extraction Circuits used for the Separation of Cobalt from Nickel
  
  by A.J. Lathwood; J. Riordan and A.G. Pavlides, BATEMAN; Copyright held by SAIMM

• Testing and Modelling of a Novel Iron Control Concept in a Two Stage Ferric Leach / Pressure Oxidation Process for the Sepon Copper Project
  
  by K.G Baxter, A.G. Pavlides and D. Dixon, BATEMAN and UBC, Banff Pressure Hydrometallurgy Conference (2004). Copyrights reserved by The Canadian Institute of Mining, Metallurgy and Petroleum, Pressure Hydrometallurgy Proceedings, pages 57 to 76, October 2004. To get information on this proceeding, visit: www.metsoc.org/library/info/1-894475-54-2.asp

• Dense-medium separation testwork and computer simulations of practical separations for the pre-concentration of base metal ores
  
  by G.M. Cresswell - presented by Mark Cresswell, BATEMAN, SAIMM Copper, Cobalt, Nickel and Zinc Recovery Conference, 16-18 July 2001. Copyright held by SAIMM

• The Sepon Copper Project - Development of a Flow sheet
  
  by K.G. Baxter, D. Dreisinger and G. Pratt, BATEMAN, UBC and Oxiana; Hydrometallurgy Conference (2003. Copyright held by TMS

• Development strategies using hydrometallurgy: the Erdenet experience
  
  by N. Gantumur and K. Baxter; Erdenet Mining Company and Bateman Engineering Pty Ltd. Presented by S. Burks, Bateman Engineering BV at ALTA 2005 Copper Conference, Perth. Australia. www.altmet.com.au

• An engineering comparison of the three treatment flowsheets in WA nickel laterite projects

  by R. Mayze, Bateman Brown & Root, ALTA 1999, Nickel /Cobalt Pressure Leaching & Hydrometallurgy Forum. www.altamet.com.au

• Design of the Mt Gordon Chalcocite Project

  by K.G. Baxter and C Kaiser, Bateman Australia Pty Ltd and G.D. Richmond, Western Metals Resources Limited; ALTA Copper 1999. www.altamet.com.au

• Ion exchange column design for separation of nickel traces from Cobalt electrolyte

  by A.G. Pavlides, Bateman Engineering and J. Wyethe, Council for Mineral Technology, ALTA SX/IX 2000. www.altamet.com.au

• Cobalt in Africa: New developments

  by S.F. Burks, BATEMAN, ALTA 1997, Nickel/Cobalt Pressure Leaching & Hydrometallurgy Forum. www.altamet.com.au