The Bateman single toggle
jaw crusher.

The Bateman spring cone crusher.

Bateman Jaw Crusher

The Bateman single toggle jaw crusher features excellent crushing ratio, consistent performance, easy maintenance and low operating costs. It is widely used in the mining, metallurgical building material, highway, railway and chemical industries. Various material with compressive resistance less than 320MPa can be crushed.

Bateman Hydraulic Cone Crusher

The Bateman Hydraulic Cone Crusher is a new generation cone crusher by adopting the advanced and optimised idea of design. The use of a higher curve crushing frequency and improved eccentric distance results in a steeper reduction. As a result, capacity is greatly improved and energy consumption lowered.

The successful combination of a high capacity crushing chamber with a higher crushing frequency means the volumetric capacity is greatly improved. By using the layered crushing principle, the shape of the product is mostly cubic and to a great extent, the quantity of the undesirable needle and flaked shape of material is reduced to one operation. With the basis of this crusher being hydraulic, this allows for easy operation and automation thus improving reliability and life performance.

The design of construction accounts for its easy operation and maintenance, adjustment of the discharge opening: and replacement of the liner plate helps to reduce the down time and manpower.

Due to the optimised design and hydraulic protection of this crusher, the mechanical availability can be expected to exceed 85%.

Bateman Spring Cone Crusher

The Bateman Spring Cone is suitable for crushing various ore and rock. This crusher has the advantage of reliable construction, high productivity, easy adjustment and low cost of operation. The spring tramp release system acts as an overload protection system that allows tramp to pass through the crushing chamber without damage to the crusher. The type of crushing chamber depends upon the size of feed and required fineness of the crushed product. The standard head is applied to medium crushing, the medium type is applied to medium or fine crushing and the shorthead is applied to fine crushing.